Charging a Device Using an Adapter
1.Select the adapter that fits securely into the power jack on your portable device and plug it into the input/output cord.
2.Insert the USB plug on the input/output cord into the USB port on the end of TekCharge.
3.Connect the adapter plug into the power jack on your portable device.
4.Slide the TekCharge power switch to ON to provide power through the USB port. The capacity indicator lamp will light up to indicate the remaining battery capacity as follows:
Green: 70% - 100%
Orange: 30% - 70%
Red: 0% - 30%
Charging a device using its USB cable.
5.Turn on the portable device and use it as you would normally. While connected, TekCharge will power and/or charge your device.
or
Leave the portable device turned off and TekCharge will charge the device battery.
6.When finished, slide the power switch to OFF and unplug the power output cord from TekCharge and your device.
NOTE: If none of the included adapters fits snugly into your portable device power jack, please go to our web site at www.tekkeon.com/mp1800adapters to determine which adapter plug you need for your device. You can obtain most adapters through the web site, or by contacting Tekkeon by phone at:
6
