Acer MK4025GAS Security, Enter Select, Information, Main, Boot, Exit, Set User Password, Disabled

Security

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

PhoenixBIOS Setup Utility

Information	Main		Security	Boot	Exit
							Item Specific Help
User Password is :			Clear
Supervisor Password is :			Clear
						Supervisor Password
Set User Password			[Enter]			controls accesses of the
Set Supervisor Password			[Enter]			whole setup utility.
						It can be used to
Primary HardDisk Security			[Disabled]			boot up when Password
						on boot is enabled.
Password on Boot			[Disabled]
F1 Help	↑ ↓ Select Item			F5/F6 Change Values				F9 Setup Defaults
Esc Exit	← → Select Menu			Enter Select	4Sub-Menu			F10 Save and Exit
The table below describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Parameter			Description					Option
Supervisor Password Is		N/A					N/A
User Password Is		N/A					N/A
HDD Password Is		N/A					N/A
HDD Master ID		N/A					N/A
Set Supervisor Password		Press Enter to set the administrator					Length -- No more than 8
		password. When set, this password					characters
Set User Password
		protects the BIOS Setup Utility from					Characters -- 0-9, A-Z (not
		unauthorized access.					case sensitive)
		[Set]: System password is set
		[Clear]: System password is not set

36 Chapter 2