Acer N141I1-L05 (GLARE), QD14TL0102, PLUTO MK6025GAS, MK4025GAS, KA100A manual Removing the LCD Module

Models: LISHIN SLS0335A19A54LF HT141WX1-100 MK4025GAS PLUTO MK8025GAS N141I1-L05 (GLARE) N141C1-L02 (WXGA+) LITEON PA-1650-02W PLUTO MK6025GAS KA100A QD14TL0102

1 98
Download 98 pages 50.95 Kb
Page 53
Image 53
Removing the LCD Module

.

Removing the LCD Module

1.Open the notebook as shown.

2.Detach the middle cover from the main unit.

3.Remove the two screws that secure the keyboard.

4.Turn over the keyboard as shown.

5.Disconnect the keyboard cable then remove the keyboard.

6.Tear off the tape fastening the wireless antenna, then pull out the antenna from the main unit.

7.Disconnect the LCD cable from the main board.

8.Close the LCD module and turn over the notebook, then remove two screws fastening the LCD module on the bottom as shown.

9.Remove one screw holding the LCD module on the rear side.

Chapter 3

47

Page 53
Image 53
Acer N141I1-L05 (GLARE), QD14TL0102, PLUTO MK6025GAS, MK4025GAS, N141C1-L02 (WXGA+), PLUTO MK8025GAS Removing the LCD Module