3-6. Installing Wiring Harness Tab Connectors
NOTE
Disconnect vehicle wiring harness plug from trailer wiring connector before beginning installation. Use wiring harness tab connectors only with insulated wires.
1 3
4
5
2
1 | Connector | Insert unstripped tap wire into other channel | |
2 | Run Wire | until it hits internal stop. | |
3 | Tap Wire | 4 | Contact |
Place unstripped run wire in slotted channel. | 5 | 9 Inch Linemans Pliers | |
Ref.
Use pliers to push contact down flush with top of connector.
Close top cover.
Notes
