Miller Electric RCT-224 Trailer Mounting Wheels And Brackets On Axles, Mounting Axle On Frame

3-2. Mounting Wheels And Brackets On Axles

7

6

. Use hardware in Red bag to

				mount wheels.
			1	Wheel
4			2	Hub
			3	Lug Nut
			Install wheels on hubs. Install lug
6		1	nuts and tighten to 70 ft lb (95 N.m).
5			4	Mounting Bracket
	2		5	1/2-13 x 1-1/2 in Screw
			6	1/2 ID Flat Washer
			7	1/2 ID Lock Nut
			Attach mounting brackets to brack-
			ets on axle. Save remaining hard-
			ware to mount unit on trailer (see
			Section 3-7).
			. Do not tighten hardware until
				unit is mounted on trailer (see
			3	Sections 3-7and 3-8).
				Tools Needed:
				3/4, 13/16 in
				3/4 in
				802 812

3-3. Mounting Axle On Frame

NOTE

All directions are given as facing the towing vehicle. The word “front” means the hitch end of the trailer.

1 6 7

4

6

5

2

3

8 Tools Needed:

9/16 in

9/16 in

1Axle Assembly

2Welded Stop

3Frame

4Plate

53/8-16 x 4 in Screw

63/8 ID Flat Washer

73/8 ID Lock Nut

Position frame against the right side of the welded stop on the axle. Attach axle to frame using supplied hardware. Tighten hardware to 30 ft lb (41 N.m).

8 Jack

Pull pin and rotate jack to vertical posi- tion. Pin locks jack in place. Turn han- dle to raise or lower trailer.

When jack is not needed, pull pin and rotate jack to horizontal position.

802 813

OM-6611 Page 7