Panasonic TC-L32C3 owner manual Information Support

	Data format for SD Card browsing
Photo:	Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF**
	standards
Data format:	Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0)
Max. number of files:	9,999
Image resolution:	160 x 120 to 20,000,000

*DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard

**EXIF (Exchangeable Image File Format)

Caution

A JPEG image modified with a PC may not be displayed.

Partly degraded files might be displayed at a reduced resolution.

Note

Folder structure viewed in PC

DCIM			Created automatically
	100_PANA		3-digit folder number + 5-digit arbitrary characters
		P1000001.JPG	4-digit arbitrary characters + 4-digit file number
		P1000002.JPG	Usable characters: 1-byte “a to z”, “A to Z”, “0 to 9,” and “_”
		P1000003.JPG
		P1000004.JPG

The folder and file names may be different depending on the digital camera used.

For the suitable SD Memory Cards, please confirm the latest information on the following website.

http://panasonic.jp/support/global/cs (This site is in English only)

Cautions when handling SD Cards

Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
Do not remove the card while the unit is accessing data (this can damage card or unit).
Do not touch the terminals on the back of the card.
Do not subject the card to high pressure or impact.
Insert the card in the correct direction (otherwise, card or unit may be damaged).	mm
Electrical interference, static electricity or erroneous operation may damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or	32
erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)

24 mm

Technical

Message

SD card slot is empty.

No photos

Cannot read file

SD Card warning messages

Meaning

The card is not inserted.

The card has no data or this type of data is not supported.

The file is broken or unreadable.

The TV does not support the format.

Information Support

VIERA LinkTM “HDAVI ControlTM”

HDMI connections to some Panasonic equipment allows you to interface automatically. (p. 23) This function may not work normally depending on the equipment condition.

The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.

Image or sound may not be available for the first few seconds when the playback starts.

Image or sound may not be available for the first few seconds when Input mode is switched.

Volume function will be displayed when adjusting the volume of the equipment.

If you connect equipment that has “HDAVI Control 2 or later” function to the TV with HDMI cable, the sound from DIGITAL AUDIO OUT terminal can be output as multi channel surround.

“HDAVI Control 5” is the newest standard (current as of December, 2010) for the HDAVI Control compatible equipment. This standard is compatible with the conventional HDAVI equipment.

Information

37