Panasonic TC-P42C1, TC-P50C1 , , , ,

Advanced

How to Use Menu Functions

(picture, sound quality, etc.)

Adjustments/Configurations (alternatives)

Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)

Sets favorite channels. (p. 20)

Changes the station identifier. (p. 39)

Checks the signal strength if interference or freezing occurs on a digital image. (p. 39)

Adjustments/Configurations (alternatives)

Sets the mode to select the channel with Channel up/down button

(All/Favorite/Digital only/Analog only)

• Favorite: Only channels registered as FAVORITE (p. 20)

Channel surf mode

All

Selects the screen menu language (p. 16) Language

Adjusts the clock (p. 17) Clock

Sets channels (p. 39) ANT/Cable setup

Selects the terminal and label of the external equipment (p. 41)

Prevents “Image retention” with Wobbling. (Automatic/Periodic)

• Automatic: Shifts the display image automatically.

• Periodic:

Shifts the display image every (1/2/3/4) minutes according to what was set in the “Time (minutes)” menu.

Pixel orbiter Automatic

Sets the time for “Pixel orbiter-Periodic” setting. (1/2/3/4)

Time (minutes)

Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)

• The recommended setting is “Bright” to prevent panel “Image retention”. (p. 48) 4:3 side bars Bright

Press “OK” to start horizontal “Scrolling” on the screen (p. 48) Scrolling bar

Controls equipment connected to HDMI terminals (p. 32) (On/Off)

• “Power off link”, “Power on link”, and “Default speakers” cannot be selected if “Off” is set. VIERA Link On

Sets “Power on link” of HDMI connection equipment (p. 32) (Yes/No)

Power on link

Yes

Sets “Power off link” of HDMI connection equipment (p. 32) (Yes/No)

Power off link

Yes

Set “Stand-by power save” of HDMI connection equipment. (p. 32) (No/Yes) Stand-by power save

Set “Auto power stand-by” of HDMI connection equipment. (p. 32)

(No/Yes (with reminder)/Yes (no reminder) Auto power stand-by

Selects the default speakers (p. 32) (TV/Theater)

Default speakers

To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed

for more than 10 minutes. (Enable/Disable)

Note

• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital channel.

• “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned

on for the first time after turning the power off by “No signal for 10 minutes”.

•

The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

No signal for 10 minutes

Enable

To conserve energy, the TV automatically turns off when no operation of remote or side panel key

continues for more than 3 hours. (Enable/Disable)

Note

• Not in use when setting “Auto power on” or “On/Off Timer”.

• “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on

for the first time after turning the power off by “No activity for 3 hours”.

•

The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

No activity for 3 hours

Disable

Turns TV On automatically when the cable box or a connected device is turned On (No/Yes)

•

The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 42)

Auto power on

Set “Thumbnail” or “Slideshow” to play back SD cards automatically. (Slideshow/Thumbnail/Set later/Off)

Play SD card automatically

Set later

Displays TV version and software license. About

Performing Reset will clear all items set with Setup, such as channel settings. (p. 38) Reset to defaults

(Continued)