VIERA LinkTM Connections
Follow the connection diagrams below for HDAVI control of |
| If connection (or setting) of equipment compatible with HDAVI |
a single piece of AV equipment such as a Panasonic DVD |
| control is changed, switch the power of this unit Off and On |
recorder (DIGA), RAM theater, or Player theater system. |
| again while the power of all equipment is On (so that the unit |
Refer to page |
| can correctly recognize the connected equipment) and check |
control information. |
| that DVD recorder (DIGA), RAM theater, and Player theater |
• Optional HDMI and/or optical cables are not included. |
| playback operate. |
Note
HDMI 1 is recommended.
When connecting to HDMI 2/HDMI 3/HDMI 4, set the input mode to HDMI 2/HDMI 3/HDMI 4 (p. 20) initially before | |
connecting to HDMI 2/HDMI 3/HDMI 4. After connection, confirm the HDMI control functions (p. | |
■Connecting this unit to the DVD recorder (DIGA), RAM | ■Connecting this unit to a DVD |
theater, or Player theater | recorder (DIGA) and AV amp |
For DVD recorder (DIGA): Connect with HDMI cable For RAM theater and Player theater:
Connect with the HDMI and audio cables.
If audio cable is not connected, you cannot listen to the TV program through the theater system.
Digital Audio out
When using an “VIERA Link” audio- video amplifier and a compatible DVD recorder (DIGA) use a daisy chain connection as shown below.
Recommended AV
Back of the TV
or
| 1 |
|
|
|
COMPONENT | R | L | PR | |
IN |
|
|
|
|
| 2 | R | L | PR |
VIDEO 1 |
|
|
| |
IN |
| R | L |
|
|
|
| ||
PROG | AUDIOTO |
|
|
|
OUT | AMP | R | L |
|
|
|
| AUDIO | VIDEO |
PB Y
PB Y
AUDIO
IN
S VIDEO
PC
or
HDMI 1 | HDMI 2 | HDMI 3 |
or 
or
Connections
Advanced
AUDIO | HDMI | HDMI | HDMI |
IN | (AV OUT) | (AV OUT) | (AV OUT) |
| HDMI cable |
HDMI | HDMI |
(AV OUT) | (AV IN) |
or |
Home Theater Systems | HD Camcorder | DVD recorder (DIGA) | AV amp with VIERA | DVD recorder (DIGA) |
with VIERA Link function | with VIERA Link | with VIERA Link function | Link function | with VIERA Link function |
| function |
|
|
|
One AV amp and one DVD recorder (DIGA) can be operated with this unit.
Refer to the diagram above when connecting a DVD recorder/player and an AV amp to your Viera Television.
■Setting of this unit after connection
After making connections as shown above, set “VIERA Link” (under “VIERA Link setting”) to “On” using the Setup menu. (p. 21,
Note
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
About HDMI cable for connecting Panasonic HD camcorder, read the manual of the equipment.
41
