Panasonic TH-65PX600U operating instructions Watching Videos and DVDs, Displaying PC Screen on TV

Watching Videos and DVDs

Some Panasonic equipment connected to the TV unit can be operated with the remote control. Programming the remote control is necessary to operate other manufacturers’ products. (p. 43)

With VCR or DVD turned On

1 Switch to external input

Press to display the Input select menu.

2	Select the input mode			Press corresponding NUMBER
	Input select
	[1]	TV		key on the remote control to
				select the input of your choice.
	[2] Component 1
	[3] Component 2		or
	[4]	HDMI 1	select	Press arrow up/down to select
	[5]	HDMI 2		the input of your choice, then
				press OK.
-	[6] HDMI 3		enter
				If during selection, no action
	[7]	Video 1		•is taken for several seconds,
	[8]	Video 2		the “Input select” menu is
				exited.
	[9]	Video 3
	[0]	PC		Label	Terminal

(Initial screen)
		Video 1
•indicated.The terminal and label of the connected device is		VCR
To change the input label (p. 40)
3 Operate	[example]

the VCR or DVD with the remote control

(example)

Displaying PC Screen on TV

The screen of the PC connected to the unit can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC (p. 44)

1Select the external input

2	Select “PC”
	PC	Corresponding signals
		•(p. 26)

Displays

PC screen

ŶTo return to TV

ŶPC menu setting (changed as desired)

•Making settings “How to Use Menu Functions” to (p. 28)

Menu Item Adjustments/Configurations(options)

Normal	Resets PC adjust
	H&V	: The H and V sync signals are input from the HD/VD connector.
Sync	•On G	: Uses a synchronized signal on the Video G signal, which is input from the G
	•	connector.
Dot clock	Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
	blurred.
H-position	Adjust the horizontal position.

Viewing Displaying PC Watching Videos

ŶPress to return to

TV

Note

•For details, see the manual of the equipment

or ask your local dealer.

VCR MODE	DVD MODE
VCR Record	Record
-	Open/Close
-	Skip Reverse/Forward
Rewind/Fast Forward	Reverse/Forward
Stop	Stop
Pause	Pause
Play	Play

Picture

PC adjust

V-position	Adjust the vertical position.
	Alleviates the problem if the whole picture appears to flicker or is blurred.
Clock phase	First adjust the Dot Clock to get the best possible picture, then adjust the
	Clock Phase so that a clear picture appears.

Note It may not be possible to display a clear picture due to poor input signals.

Input	Switches to wide display.
	Input signal switched from VGA to WVGA
resolution	••Input signal switched from XGA to WXGA
	Displays the H (Horizontal)/V (Vertical) frequencies.
H-frequency	Display range
V-frequency	•Horizontal: 15 - 110kHz

Screen on TV and DVDs

(For other operations, see p. 46.)

26

Vertical: 48 - 120Hz

•Audio menu (p. 28)

•For PC input, only audio signals can be output from PROG. OUT terminals.

27