Technical Information (Continued)

PC Input Terminals Connection

Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

Some PC models cannot be connected to the set.

There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal.

The maximum resolution: 1, 280 × 1, 024

If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.

Signal Names for D-sub 15P Connector

Maintenance

First, unplug the AC cord plug from the wall outlet.

Display panel

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of the same type, until the surface is dry.

Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the surface may be adversely affected.

11 12 13 14 15

6 7 8 9 10

1 2 3 4 5

Pin Layout for PC Input Terminal

Pin No.

Signal Name

Pin No.

Signal Name

Pin No.

Signal Name

 

R

6

GND (Ground)

11

NC (not connected)

 

G

7

GND (Ground)

12

NC

 

B

8

GND (Ground)

13

HD/SYNC

 

NC (not connected)

9

NC (not connected)

14

VD

5

GND (Ground)

10

GND (Ground)

15

NC

Cabinet

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

Do not allow any detergent to come into direct contact with the surface of the Plasma TV. If water droplets get inside the unit, operating problems may result.

IR Blaster connection

With the IR Blaster connection, scheduled recording can be done easily by using the TV Guide feature in this set. Connect the IR Blaster if you wish to send remote control signals from the plasma TV to control the recording of a connected video recorder (VCR).

Position the IR Blaster emitter facing the signal sensor of the video recorder and you will be able to easily record programs from digital broadcasts. (p. 44)

Before the VCR starts timer recording, please confirm that the VCR’s power is turned off.

The TV acts as a proxy for some remote control operations of the VCR.

The TV converts scheduling data

G-LINK jack

displayed on the TV to a remote

IR Blaster (Supplied)

control signal and sends it

 

G-

 

LINK

TV

CableCARD

Video recorder (VCR)

 

Avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Pedestal

CleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of neutral detergent has been added, and then wipe with a dry cloth.

Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.)

Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products or the like. (Doing so will cause deterioration.)

Technical

VCR

Setting the recording time, channel and recording mode, etc.

Infrared emitter

No need to set recording time or channel on the video recorder

Maintenance FAQs, etc. Information

54

55

Page 28
Image 28
Panasonic TH-65PX600U operating instructions Maintenance FAQs, etc. Information

TH-65PX600U specifications

The Panasonic TH-65PX600U is a standout plasma television that has made waves since its introduction in the market. Designed for those who seek an exceptional home theater experience, this model offers a stunning 65-inch display that promises vibrant colors, deep blacks, and sharp images.

One of the key features of the TH-65PX600U is its high-definition resolution of 1080p, capable of delivering crisp and lifelike visuals that pull viewers into the action. The plasma technology employed in this television allows for superior color accuracy and a wide viewing angle, ensuring that whether you are sitting directly in front or off to the side, the picture quality remains impressive.

The display boasts a contrast ratio that reaches optimal levels, resulting in images that feature stunning detail, especially in darker scenes. This characteristic is attributed to the self-illuminating pixels in plasma technology, which enable complete control over individual pixels, providing rich dark tones and bright highlights.

In addition to its impressive display capabilities, the Panasonic TH-65PX600U is equipped with a range of connectivity options. It features HDMI inputs, making it easy to connect to various high-definition devices like Blu-ray players, gaming consoles, and streaming media devices. The TV also supports component and composite video inputs, offering flexibility for connecting older devices.

The model incorporates Panasonic’s Advanced Plasma Display Panel technology, which enhances overall image processing and reduces the effects of motion blur. This is particularly beneficial for watching fast-paced content such as sports or action movies, allowing for smooth visuals that do not detract from the viewer’s experience.

Another notable characteristic is its sleek design, which fits seamlessly into modern living spaces. It combines a stylish aesthetic with practical functionality, making it both a visual and functional centerpiece.

Sound quality is also addressed in the TH-65PX600U, featuring a built-in speaker system that provides clear audio to accompany the stunning visuals.

Overall, the Panasonic TH-65PX600U is an exemplary model that encapsulates advanced technology and user-friendly features. With its excellent display quality, robust connectivity, and elegant design, it remains a compelling choice for home entertainment enthusiasts seeking a high-quality plasma TV experience.