SCREENSAVER (For preventing image retention)
Setup of SCREENSAVER Time
After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Press to select START TIME / FINISH TIME (when TIME OF DAY is selected).
Press to select SHOW DURATION / SAVER DURATION (when INTERVAL is selected).
Press to select SCREENSAVER DURATION (when STANDBY AFTER SCR SAVER is selected).
Press to setup. 
button: Forward 
button: Back
Notes:
•Pressing “
” or “
” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
•Pressing “
” or “
” button continuously changes the Time by 15 minutes.
•“SCREENSAVER DURATION” of the “STANDBY AFTER SCR SAVER” can be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER SCR SAVER” will not be activated.
Note: Timer function will not work unless “PRESENT TIME OF DAY” is set.
SCREENSAVER |
| |
PRESENT TIME OF DAY | 15:00 | |
START | SCROLLING BAR ONLY | |
FUNCTION | ||
MODE | TIME OF DAY |
|
START TIME | 6:15 |
|
FINISH TIME | 12:30 |
|
SCREENSAVER |
|
| |
PRESENT TIME OF DAY | 15:00 | ||
START | SCROLLING BAR ONLY | ||
FUNCTION | |||
MODE |
| INTERVAL |
|
SHOW DURATION | 12:00 |
| |
SAVER DURATION | 3:00 |
| |
SCREENSAVER |
|
| |
PRESENT TIME OF DAY | 15:00 | ||
START | SCROLLING BAR ONLY | ||
FUNCTION | |||
MODE | STANDBY AFTER SCR SAVER | ||
SCREENSAVER DURATION | 6:15 |
| |
38
