Panasonic TH-L32C10R Display Viera Link Menu Select Speaker Selection, Set to Home Cinema or TV

VIERA Link “ Control™”

Features available (Using VIERA Link Menu)

Speaker control Speaker Selection

You can control the theatre speaker with this TV remote control by pointing at the TV’s signal receiver.

If you cannot operate, check the settings and the equipment “VIERA Link features and connections” (p. 32 - 33)

Access and control the speaker volume

1 Display “VIERA Link Menu”

2 Select “Speaker Selection”

VIERA Link Menu
Pause Live TV
	Start
Direct TV Rec
	Start
SpeakerVIERA LinkSelectionControl
	Recorder
Speaker Selection
	Home Cinema

select

3 Set to “Home Cinema” or “TV”

Home Cinema

set

Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it is in Standby mode and the sound is from theatre speakers connected to the equipment.

Volume up / down

Volume slide bar will be displayed when adjusting the volume of the equipment.

Mute

The sound of TV speakers is mute.

When the equipment is turned off, TV speakers will be active.

TV

TV speakers are active.

Note

If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect with HDMI cable (p. 33), and then select “Home Cinema”. To enjoy the sound from the DIGA Recorder in multi- channel sound, connect an HDMI cable from the DIGA Recorder to the Amplifier (p. 33).

Note

These functions may not work properly depending on the connected equipment.

Image or sound may not be available for the first few seconds when input mode is switched.

Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier. Read the manual of the equipment.

“HDAVI Control 4” is the newest standard (current as of December, 2008) for HDAVI Control compatible equipment. This standard is compatible with conventional HDAVI equipment.

To confirm this TV’s version of HDAVI Control “System Information” (p. 21)

38