Panasonic TH-L32C11KG, TH-L32C10X, TH-L32C12K, TH-L32C10M manual Preparations, Features available

VIERA Link “ Control™”

Preparations

Connect the equipment supporting VIERA Link.

Set up the connected equipment. Read the manual of the equipment.

For optimal recording, the settings of the recorder might be required. For details, read the manual of the recorder.

Set VIERA Link On in Setup Menu“VIERA Link Settings”“VIERA Link” (p. 21)

Set up the TV After connection, turn the equipment on and then switch the TV on. Select the input mode to HDMI1 or HDMI2 (for TH-L32C12K, only HDMI1 is available) (p. 16), and make sure that an image is displayed correctly.

This setup should be done each time when the following conditions occur:

• for the first time / • when adding or reconnecting equipment / • when changing setup

Features available

Channel download

Channel setting can be downloaded to the recorder.

Easy playback

Automatic input switching - When the connected equipment is operated, input mode is switched automatically.

Power on link

Set Power on Link “On” in Setup Menu to use this function“Power on Link” (p. 18-19, 21) When the connected equipment starts playback or direct navigator / function menu for the equipment are activated, the TV is automatically turned on. (Only when TV is in Standby mode.)

Power off link

Set Power off Link “On” in Setup Menu to use this function“Power off Link” (p. 18-19, 21) When the TV is set to Standby mode, the connected equipment is also automatically set to Standby. This function will work even if the TV enters standby mode automatically by Off Timer function or

auto power standby function.

Reduce unnecessary power consumption in standby Standby Power Save

Set Standby Power Save “On” in the Setup Menu to use this function

“Standby Power Save” (p. 21)

The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization with the TV On / Off state to reduce the consumption.

When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption in Standby mode of the connected equipment is automatically minimized. When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increased to make startup time early.

This function is effective if the connected equipment can change the power consumption in Standby mode and is set to higher consumption.

Auto standby for unnecessary equipment Intelligent Auto Standby

Set Intelligent Auto Standby “On (With reminder)” or “On (No reminder)” in the Setup Menu to use this function“Intelligent Auto Standby” (p. 21)

When the TV is on, the connected equipment not in use go into Standby mode automatically to reduce the power consumption.

If you select “On (With reminder)”, the on screen message will be displayed to be noticed before working this function.

34