7
Quick Start Guide
Accessories / Options
Identifying Controls
Attaching the pedestal to TV
Identifying Controls
TV
Change the input mode
Mains power On / Off switch
Switch On to turn on the TV
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Function select
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC
mode) / Bass / Treble / Balance / Auto
Tuning (p. 20 - 21)
C.A.T.S.
(Contrast Automatic
Tracking System) sensor
Senses brightness to
adjust picture quality in
“Eco Mode” in Picture
Menu (p. 20)
SD card slot
(p. 30)
Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has
received a command.
Fix securely with
assembly screws A.
(Total 4 screws)
Tighten screws firmly.
WARNING
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your
nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
Foam mat or thick soft cloth
TH-L32C10&12&11KMRSX_EN.indb 7TH-L32C10&12&11KMRSX_EN.indb 7 6/24/09 8:50:09 AM6/24/09 8:50:09 AM