Panasonic TH-L32C12K Select the PC input, To change the settings, see the table below, Setup

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected.

To connect PC p. 40

1	Select the PC input
	Corresponding signals (p. 46)

2 To change the settings, see the table below

To return to TV

PC menu setting (changed as desired)

Menu		Item		Adjustments / Configurations (options)
Picture		R-Gain	Adjusts the white balance for red areas
	Advanced	G-Gain	Adjusts the white balance for green areas
	PC	B-Gain	Adjusts the white balance for blue areas
	Settings
		Gamma	(2.0 / 2.2 / 2.5)
		Reset to Defaults	Press the OK button to reset to the default Picture settings
			Switches to a wide view
		Input	VGA (640 x 480), WVGA (852 x 480 pixels),
			XGA (1,024 x 768), WXGA (1,280 x 768 / 1,366 x 768 pixels)
		Resolution
			Options change depending on signals
			If “H-freq.” or “V-freq.” is shown in red, the signals may not be supported.
		Clock	Set to the minimum level if noise occurs
Setup		H-pos	Adjusts horizontal position
	PC
			Adjusts vertical position
	Setup
		V-pos
		Clock Phase	Eliminates flicker and distortion
			Adjust after Clock adjustment		Set to the minimum level if noise occurs
			PC sync signal type (H & V / On Green)
		Sync	H & V	: Horizontal and Vertical sync from your PC
				(Most common sync format)
			On Green : Sync on Green sync from your PC
		Reset to Defaults	Press the OK button to reset to the default Setup settings

Other items p. 20 and p. 21.

Restore Settings Displaying PC Screen on TV

Advanced

29