VIERA Link Functions
57
MUTE
TV
VOL
[Speaker Selection] - Speaker control
You can control the theatre speaker with this TV remote control by pointing at the TV’s signal receiver.
If you cannot operate, check the settings and the equipment
“Summary of features”, “Connection”, “Preparations” (p. 53 - 54)
Access and control the speaker volume
e
.
N
o
l.
to
1Display [VIERA Link Menu]
2Select [Speaker Selection]
Direct TV Rec Start
Pause Live TV Start
VIERA Link Control Recorder
Speaker Selection Home Cinema
VIERA Link Menu select
3Set to [Home Cinema] or [TV]
set
[Home Cinema]
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically
turned on if it is in Standby mode and the sound is from theatre speakers
connected to the equipment.
Volume up / down VOL
Mute
The sound of TV speakers is mute.
When the equipment is turned off, TV speakers will be active.
[TV]
TV speakers are active.
Multi-channel sound
If you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an
Amplifier, connect with HDMI cable and RCA cables (p. 53), and then select
[Home Cinema]. If your Amplifier has “HDAVI Control 5” function, you can
connect only with HDMI cable. In this case, connect your Amplifier to the
TV’s HDMI2 terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound,
connect an HDMI cable from the DIGA Recorder to the Amplifier (p. 53).
Note
These functions may not work properly depending on the connected equipment.
Image or sound may not be available for the first few seconds when the Input mode is switched.
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or
Amplifier. Read the manual of the equipment.
“HDAVI Control 5” is the newest standard (current as of December, 2010) for HDAVI Control
compatible equipment. This standard is compatible with conventional HDAVI equipment.
To confirm this TV’s version of HDAVI Control [System Information] (p. 29)
TH_L37U30KMTX_EN.indd 57TH_L37U30KMTX_EN.indd 57 3/18/2011 4:11:22 PM3/18/2011 4:11:22 PM