![](/images/new-backgrounds/1130136/13013663x1.webp)
Set Digital TV channel manually Digital TV Manual Tuning
Normally use “Digital TV Auto Tuning” or “Update Channel List” to update Digital TV channels on your channel list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
Digital TV Manual Tuning |
| 562.00 MHz | select physical channel | |
Physical Channel | [CH32] |
| adjust frequency (set where the level of | |
Signal Strength | 0 |
| 10 | |
AnalogueSignal QualityScan | 210 |
| 1068 | “Signal Quality” becomes the maximum) |
No. Channel Name |
| Type | New |
search
●All channels found will be added to the Digital TV Channel List.
Digital TV: 0
Set Analogue TV channel manually Analogue TV Manual Tuning
Manual Tuning
Set Analogue TV channel manually after Analogue TV Auto Tuning.
●If a VCR is connected only with the RF cable, select channel position “0”.
Analogue TV Manual Tuning
| 1 BBC1 |
|
|
| CH33 |
|
|
| Manual Tuning | 0 |
|
| CH3375 |
|
|
|
|
|
|
| |||
|
|
|
|
| |||
Select a channel position |
| Select a channel | Search and store |
search
store
Update channels automatically Update Channel List
You can add new channels, delete duplicated channels, update channel name and position automatically to Channel List.
Digital TV Update Channel List |
|
| ●The Digital TV Channel List is updated with the current settings | ||
| AnScanlogue Scan | CH216 | 689 |
| saved as they are. |
| This will take about 3 minutes. |
|
| ||
| RF Ch | Channel Name | Type Quality |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital TV: 0
Searching
Display a message New Channel Message
Selects whether to give a message when new Digital TV channels are found. (Off / On)
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Check Digital TV signal Digital TV Signal Condition
Selects a channel and checks the Digital TV signal condition.
Tuning Channels
Advanced
●To change the channel ![](/images/new-backgrounds/1130136/13013663xi10.webp)
Digital TV Signal Condition
Channel Name |
|
|
|
| |||
| 101 DZFinfokanal |
|
| ||||
Signal Quality |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Signal Strength |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Network Name | 0 | 2 | 4 | 6 | 8 | 10 | |
|
|
|
|
|
|
| |
| RiksTV |
|
|
|
|
| |
RF Parameter |
|
|
|
| |||
| [CH32] 562.00MHz |
|
|
A good Signal Strength is not an indication of suitable signal for Digital TV | |
reception. Please use the Signal Quality indicator as follows: | |
Signal Quality: | |
●Green bar | Good |
●Yellow bar | Poor |
●Red bar | Bad (Check the aerial) |
31