INPUT button (Input signal selection) (see page 17)
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen will switch. (see page 23)
Normal Viewing
SOUND
PICTURE
POS./SIZE
SETUP

Basic Controls

Main UnitBrightness Sensor

Detects the brightness in the viewing environment

Remote control sensor

INPUT MENU -/ VOL+/ ENTER/

Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed:

“+”: press to move the cursor up

“–”: press to move the cursor down (see page 23)

Enter / Aspect button (see page 20, 23)
Main Power On / Off SwitchPower Indicator

The Power Indicator will light.

• Power-OFF .... Indicator not illuminated (The unit will

still consume some power as long as the power cord is still inserted into the wall outlet.)

• Standby ......... Red

Orange (When “Slot power” is set to

“On” and Terminal Board is installed. See page 54)

Orange (Depending on the type of the function board installed, when the power is supplied to the slot)

Orange (When “CONTROL I/F SELECT” is set to “LAN” or “WEB CONTROL” is set to “ON”. Refer to “Operating Instructions, Network Operations”.)

Orange (When “QUICK WHITEBOARD LAUNCH” is set to “ON”. See page 36)

Orange (When “STANDBY PEN CHARGING MODE” is set to “ON” or “ON[4hrs]”. See page 37)

•Power-ON ...... Green

•PC POWER MANAGEMENT (DPMS)

........................Orange (With PC input signal. See page 44)

•DVI-D POWER MANAGEMENT

........................Orange (With DVI input signal. See page 44)

18