Options Adjustments

Touch Panel settings (Settings when using Touch Panel)

The mode to restrict NANODRIFT SAVER (see page 42) operation when using Touch Panel (available as an option) is set up.

Options1/3

Weekly Command Timer

Audio input select

Touch Panel settings

Press ACTION () button

Touch Panel settings

Touch Panel mode

On

Calibration mode

Set “Touch Panel mode” to “On”.

1select

2adjust

Calibration mode

This setting is used in calibrating a touch panel.

You can configure the setting if “Touch Panel mode” is “On”.

 

Select “Calibration mode” and then press

.

Touch Panel settings

1

select

When the menu is not displayed

 

 

Touch Panel mode

On

 

(normal screen)

 

 

Hold down

for over 3 seconds.

Calibration mode

 

 

ª

2

set

 

 

 

Calibration mode

The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds. After 180 seconds or when you have the menu displayed with a remote control, Calibration mode is cancelled.

Note:

For information on how to set up Calibration, please see Touch Panel instruction manual.

58