The following three system inputs are combined:
A SLOT INPUT/NETWORK
B HDMI/DVI/COMPONENT/PC C VIDEO
Note:
Two screen display cannot be displayed with the same system inputs such as HDMI―DVI combined.

MULTI PIP

You can display two pictures, such as a video image and computer image, in a two-screen display.

Notes:

•If “Input lock” in Options menu is set to other than “Off”, two screen display isn’t available (see page 53).

•2k1k signals that are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD) cannot be displayed in two- screen display.

MULTI PIP SETTINGS

Set the functions and mode for two-screen display in “MULTI PIP SETTINGS” in the SETUP menu. (see page 38)

PIP MODE

There are two modes for two screen display:

PIC IN PIC

Displays two input images combined.

SLOT INPUT

Main screen input Sub screen input

PIC IN WHITEBOARD

Displays the built-in WhiteBoard with the other input image combined.

WHITEBOARD

PC

Main screen is fixed to WHITEBOARD.

Inputs supported for the sub screen: HDMI/DVI/COMPONENT/PC/VIDEO

Note:

SLOT INPUT and NETWORK cannot be displayed on the sub screen.

Note:

SD signal is displayed in 4:3 mode on the sub screen.

Using Two Screen Display

Set “MULTI PIP” in “MULTI PIP SETTINGS” to “ON” (see page 38). Two screen display appears.

Using the FUNCTION button

ON/OFF of “MULTI PIP” switches. “MULTI PIP SETTINGS” menu appears.

Switching Sub Screen Position

Press to switch the sub screen position.

Note:

Please use the "FUNCTION BUTTON SETTINGS" to set the FUNCTION button (see page 46).

Changing the Size of Sub Screen

Press to change the size of the sub screen.

Note:

Alternatively, “SUB SCREEN SIZE” and “SUB SCREEN POSITION” in “MULTI PIP SETTINGS” can be used for the same operation (see page 38).

22