Adjusting POS./SIZE

1

2

3

Press to display the POS./SIZE menu. Press to select the menu to adjust.

Press to adjust the menu.

POS./SIZE

 

NORMALIZE

NORMAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H-POS

0

 

 

 

 

 

H-SIZE

0

 

 

 

 

 

 

 

 

 

 

V-POS

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

V-SIZE

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

DOT CLOCK

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOCK PHASE

0

 

 

 

 

 

 

 

 

 

 

 

 

 

CLAMP POSITION

0

 

 

 

 

1:1 PIXEL MODE

 

 

 

 

 

OFF

 

 

Note:

4

 

Unadjustable items are

Press to exit from adjust mode.

grayed out.

 

 

Adjustable items differ

 

 

depending on the input signal

Notes:

 

and the display mode.

 

 

•POS./SIZE cannot be adjusted with two screen display.

•Adjustment details are memorized separately for different input signal formats. (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the POS./SIZE function.

AUTO When inputting a PC signal as an example, “H-POS/V-POS”, “H-SIZE/V-SIZE”, “DOT CLOCK” and

SETUP “CLOCK PHASE” are automatically corrected.

This setting is enabled under the following conditions:

•When inputting an analog signal (Component/PC):

This setting is enabled if “COMPONENT/RGB-IN SELECT” (see page 48) in SETUP menu is “RGB”.

•When inputting a digital signal (HDMI/DVI): A PC format signal enables this setting.

When the signal is not PC format, this setting is enabled only if “OVER SCAN” (see page 25) is “OFF” or “1:1 PIXEL MODE” (see page 26) is “ON.” H-SIZE/V-SIZE is not automatically adjusted.

This setting will be invalid and will not work under the following conditions:

•When NETWORK input is selected.

•When VIDEO signal input

•During two screen or Digital Zoom.

•Aspect is set to “JUST”

•“Display size” in the Options menu (see page 53) is set to “On”

Using Remote Control

When on the remote control is pressed, “AUTO SETUP” will be executed.

When AUTO SETUP does not work, “INVALID” is displayed.

Auto mode

When the “Auto Setup“ is set to “Auto” in the Options menu (see page 54), automatic position adjustment starts:

•When the display power is turned ON.

•When the input signal is switched.

24