Panasonic TH 50PH11UK manual Sound Adjustment, SDI Sound Output, Press to exit from adjust mode

SOUND Adjustment

1

2

Press to display the SOUND menu.

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by listening to the sound.

SOUND	1/2
NORMALIZE NORMAL	STANDARD
AUDIO MENU
BASS	0
MID	0
TREBLE	0
BALANCE	0
SURROUND		OFF
AUDIO OUT (PIP)	MAIN

3 Press to exit from adjust mode.

Item			Details
	STANDARD: Emits the original sound.
AUDIO MENU	DYNAMIC:	Accentuates sharp sound.
	CLEAR:	Attenuates human voice.
BASS	Adjusts low pitch sounds.
MID	Adjusts normal sounds.
TREBLE	Adjusts pitch sound.
BALANCE	Adjusts left and right volumes.
SURROUND	Select ON or OFF.
	MAIN: Selects main picture sound.
	SUB: Selects PIP frame sound.			PC		PC
			A	INPUT1	A	INPUT1
AUDIO OUT (PIP)				B		B

Musical note ♪ is displayed on right side of the audio output screen label.

Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.

Helpful Hint ( /

NORMALIZE

Normalization)

While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

SDI Sound Output

This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) is installed to the unit.

SDI Sound Output	2/2
Left Channel	Channel 1
Right Channel	Channel 1
Sound Out	OFF
Level Meter	OFF

Notes:

•This menu is available only when selecting a slot that HD-SDI Terminal Board with audio (TY-FB10HD) is installed.

•This menu is unavailable when 2-picture display mode is active.

Item			Details
Left Channel	Channel 1 to Channel 16
	Selects left audio channel.
Right Channel	Channel 1 to Channel 16
	Selects right audio channel.
	ON	OFF
Sound Out	ON:	Enables audio output.
	OFF:	Disables audio output.
	OFF	1-8ch	9-16ch
	Sets audio channels to show in the audio level meter.
	8 channels are displayed in the audio level meter; 4 channels
Level Meter	each on both right and left sides of the display.
	OFF: Hides the audio level meter.
	1-8ch: Displays the audio level meter (1-8ch)
	9-16ch:Displays the audio level meter (9-16ch)

26