PICTURE Adjustments
ADVANCED SETTINGS
Enables fine picture adjustment at a professional level.
Notes:
•The adjustment values are memorized separately for each input terminal.
•The adjustment range values should be used as an adjustment reference.
NORMAL IZE |
|
PICTURE MENU | STANDARD |
|
|
PICTURE | 25 |
BRIGHTNESS |
|
0 | |
|
|
SHARPNESS | 5 |
|
|
COLOR TEMP | NORMAL |
|
|
COLOR MANAGEMENT | OFF |
ADVANCED SETTINGS |
|
ADVANCED SETTINGS |
|
NORMAL IZE |
|
BLACK EXTENSION | 0 |
INPUT LEVEL | 0 |
GAMMA | 2.2 |
AGC | OFF |
W/B HIGH R | 0 |
W/B HIGH G | 0 |
W/B HIGH B | 0 |
W/B LOW R | 0 |
W/B LOW G | 0 |
W/B LOW B | 0 |
3:2 PULLDOWN | OFF |
STUDIO GAIN | OFF |
NOISE REDUCTION | OFF |
● BLACK | Adjusts the dark shades of the image in gradation. |
EXTENSION |
|
●INPUT LEVEL Adjustment of parts which are extremely bright and hard to see.
● GAMMA | Available setting values vary depending on “PICTURE MENU” | |||
| settings and the type of input signal, as follows. | |||
PICTURE MENU | S CURVE | 1.0 2.0 | 2.2 2.5 | 2.6 |
STANDARD | – | *3 |
| *1 |
DYNAMIC |
| *3 | – | *1 |
CINEMA | – | *3 | *2 |
|
MONITOR | – | *3 | – |
|
*1 When 2k1k signals are received with the Dual Link
*2 When 60 Hz signals are received, GAMMA “2.5” can also be selected.
*3 When 2k1k signals are received with the Dual Link
● AGC | Increases the brightness of dark signal automatically. |
●“W/B” adjustment
W/B HIGH R | 0 |
|
|
|
| Adjusts the white balance for light red, light |
|
|
|
| |||
|
|
|
|
|
| |
W/B HIGH G | 0 |
|
| |||
|
|
|
|
|
| green or light blue areas. |
|
|
|
| |||
W/B HIGH B | 0 |
|
| |||
| ||||||
|
|
|
|
|
|
|
W/B LOW R | 0 |
|
|
|
| Adjusts the white balance for dark red, dark |
|
|
|
| |||
|
|
|
|
|
| |
W/B LOW G | 0 |
|
| |||
|
|
|
|
|
| green or dark blue areas. |
|
|
|
| |||
W/B LOW B | 0 |
|
| |||
|
Less | More |
Less | More |
Down Up
OFF ON
Less More
Carry out “W/B” adjustment as follows.
1.Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.
2.Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.
3.Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
23