Panasonic TQBC2372-1 manual Specifying the scaler, Select External Scaler Mode and set

Specifying the scaler

This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment.

The setting is valid with the following input signals.

1125 (1080) / 24p·25p·30p·50p·60p

1

2

3

Display the menu screen.
								SIGNAL
Select “SET UP”.								SCREENSAVER
								COMPONENT/RGB-IN SELECT
									RGB
	PICTURE					2 OK
								EXTERNAL SCALER MODE	OFF
	SET UP
								POWER SAVE	OFF
	POS. /SIZE
						1 select		STANDBY SAVE	ON
	SOUND
								POWER MANAGEMENT	OFF
								AUTO POWER OFF	OFF
								OSD DESIGN	TYPE1
Select “EXTERNAL SCALER MODE” and set.
								OSD POSITION	UPPER LEFT
								OSD LANGUAGE	ENGLISH (US)
	SIGNAL					2 change
	SCREENSAVER
	COMPONENT/RGB-IN SELECT					1 select
		RGB
				OFF	ON
	EXTERNAL SCALER MODE	OFF
				OFF: Use the built-in scaler.
	POWER SAVE	OFF
	STANDBY SAVE	ON		ON: Use an external scaler.
	POWER MANAGEMENT	OFF
	AUTO POWER OFF	OFF		Note:
	OSD DESIGN	TYPE1		Selecting “ON” in this setting deactivates the following settings and disables
	OSD POSITION	UPPER LEFT
				these operations.
	OSD LANGUAGE	ENGLISH	(US)
				POS. /SIZE menu:			H-SIZE, V-SIZE, 1:1 PIXEL MODE, DISPLAY SIZE
							(see page 31, 32)
				PICTURE menu:			BRIGHTNESS, COLOR, TINT, SHARPNESS,
							MEMORY SAVE, MEMORY LOAD (see page 22,
							26, 27)
				ADVANCED SETTINGS: 3:2 PULLDOWN, NOIZE REDUCTION (see page
							24)
				SIGNAL menu:			XGA MODE (see page 40)
				OPTIONS menu:			All Aspect (see page 42)
				ASPECT Controls (see page 18)

4

Exit the menu.

“EXT. SCALER” is displayed in the menu screen to indicate that an external scaler is in use.

NORMAL IZE	EXT.SCALER
PICTURE MENU	STANDARD
PICTURE	25
BRIGHTNESS
COLOR
TINT

or

36