Panasonic TQBC2372-1 manual Pulldown, Select the item and set, Advanced NR, Max Mid

PICTURE Adjustments

● 3:2	When “ON”, the display attempts to reproduce a more natural
PULLDOWN	interpretation of sources such as movie pictures, which are	OFF
	recorded at 24 frames per second.
	If the picture is not stable, turn the setting to “OFF”.

Note:

When “ON”, this setting only affects the following signal input:

•525i (480i), 625i (575i), 1125 (1080) / 60i signal input during “COMPONENT” input signal.

●STUDIO GAIN Sharpens the contrast for a better view when a part of the image

is too light to see. OFF

OFF: Disables “STUDIO GAIN”.

ON: Enables “STUDIO GAIN”.

ON

ON

Notes:

•“STUDIO GAIN” can be modified when “Studio mode” in the OPTIONS menu is “On”. When “Studio mode” is “Off”, this setting is “OFF” and cannot be changed. (see page 42)

•This setting is valid only when the input signals are as follows: Component Video, RGB (analog), SDI, HDMI

● NOISE REDUCTION Sets the following three NR (Noise Reduction) functions together.

VIDEO NR, MOSQUITO NR, BLOCK NR

OFF MIN

ADVANCED MAX MID

[Advanced NR]

Sets the three NR functions separately.

1	Select “ADVANCED”.
		NOISE REDUCTION	ADVANCED
		VIDEO NR	OFF
				select
		MOSQUITO NR	OFF
		BLOCK NR	OFF

2	Select the item and set.				OFF	MIN
	NOISE REDUCTION	ADVANCED
	VIDEO NR	OFF	2	set	MAX	MID
	MOSQUITO NR	OFF
	BLOCK NR	OFF	1	select

VIDEO NR: Automatically reduces unwanted picture noise.

MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.

BLOCK NR: Reduces block noise when playing MPEG videos.

Notes:

•“NOISE REDUCTION” cannot be adjusted while a PC signal is being applied.

•“BLOCK NR” cannot be adjusted while a HD signal is being applied.

Helpful Hint ( NORMALIZE

Normalization)

On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if the OK button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

24