Request Regarding Security
When using this product, security breaches of the type described below are conceivable.
•• Leakage of your private information via this product
•• Illegal operation of this product by a malicious
•• Harm to or cessation of operation of this product by a malicious
Be sure to implement sufficient security measures.
•• Set passwords, and limit the users that are permitted login access.
•• Make sure the password is as hard to guess as possible.
•• Change the password periodically.
•• Panasonic Corporation and its affiliated companies never directly ask customers for their password.
Do not give out your password even if directly asked by a
•• Always use on a network that has safety protection such as a firewall implemented.
What you can do
<WEB control> (See page 9)
The following operations are possible when using WebBrowser.
•• Setting and adjusting the projector
•• Displaying the projector status
•• Setting for message transmission
<PJLink> (See page 17)
Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used.
•• Setting the projector
•• Querying the projector status
<Command control> (Refer to “SERIAL TERMINAL” in “Technical Information” of the Basic Manual.) You can control the projector from a computer, using the control commands of the serial terminals.
If you use “WEB control”, “PJLink” or “Command control”, turn [ON] the [NETWORK CONTROL] in the NETWORK menu for the projector. (See page 7)
3
