Network setting of the projector (cont.)
NETWORK
Wired LAN settings
You can make detailed wired LAN settings.
11 Select [WIRED LAN] in the NETWORK menu and press the [ENTER] button.
WIRED DETAILED SETUP
CANCEL
SELECT 
DHCP | OFF |
| |
IP ADDRESS |
|
|
|
192.168. | 10.100 | ||
SUBNETMASK | 255.255.255. | 0 | |
DEFAULT GATEWAY |
|
|
|
192.168. | 10. | 1 | |
OK CANCEL
| DHCP |
|
| ON: | If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be |
|
| acquired. |
| OFF: | If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP |
|
| ADDRESS ], [SUBNETMASK ] and [DEFAULT GATEWAY ]. |
| “Glossary” (See page 18) | |
22 | Select each item with the [▲▼] buttons and change the settings following the | |
menu’s Operating guidance. | ||
33 | Select [OK] with the [▲▼] buttons and press the [ENTER] button. | |
Default network settings
The following settings are set before the projector leaves the factory.
DHCP | OFF |
IP ADDRESS | 192.168.10.100 |
SUBNETMASK | 255.255.255.0 |
DEFAULT GATEWAY | 192.168.10.1 |
6
