Network setting of the projector (cont.)
STATUS
Your current settings appear.
Select [STATUS] in the NETWORK menu and press the [ENTER] button.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY NETWORK
WIRED LAN |
|
NAME CHANGE |
|
NETWORK CONTROL | ON |
STATUS |
|
INITIALIZE |
|
SELECT
RETURN
ENTER
FUNCTION
The status of the following will appear.
NETWORK
DHCP | “ON” - “OFF” |
IP ADDRESS | (See page 6) |
SUBNETMASK | (See page 6) |
DEFAULT GATEWAY | (See page 6) |
MAC ADDRESS | — |
MAC ADDRESS : “Glossary” (See page 18)
INITIALIZE
You can reset the network settings to the factory default settings of the projector.
11 Select [INITIALIZE] in the NETWORK menu and press the [ENTER] button.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY NETWORK
RETURN
SELECT
ENTER
WIRED LAN |
|
NAME CHANGE |
|
NETWORK CONTROL | ON |
STATUS |
|
INITIALIZE |
|
The entry of the password is prompted if [PASSWORD] is turned [ON] in the “
SECURITY” menu.
22 Select [OK] with the [◄►] buttons and press the [ENTER] button.
| INITIALIZE |
| INITIALIZE |
OK | CANCEL |
| RETURN |
SELECT
ENTER
8
