GETTING STARTED

Step 3d. Digital TV/Cable Reception with Conventional TV

Follow this diagram if you have a conventional TV, cable service and you want to

receive digital channels through the STB and cable channels through the cable box

(or through the TV if you have no cable box.

Optional Cable Box
ANT
IN
ANT
OUT
TV
NOTE: ANTENNA, CABLE BOX, RF
CABLE, VIDEO AND AUDIO CABLES NOT
INCLUDED
DIGITAL TV/CABLE RECEPTION WITH CONVENTIONAL TV SETUP

Procedure

Move the output mode switch to the NTSC position.
Connect the antenna cable to the STBATSC/DTV input jack.
If using a cable box, connect the cable wire from the wall jack to the cable box ANT
(antenna) INjack using a standard RF cable with coaxial connector. Connect the cable box
ANT (antenna) OUT jack to the TV ANT (antenna) IN jack using a RF cable.
If not using acable box, connect the cable wire from the wall jack to the TV ANT (antenna)
INjack using a RF cable (not shown).
Follow directions in Getting Started section to connect the STB to a conventional TV.
[]