Panasonic TX-20LB30M, TX-20LB30X manual Fitting remote control batteries, How to use the LCD stand

Fitting remote control batteries

1

Pull and hold the hook, then open the battery cover.

2	3
-
+ -
+
“R6 (AA)” size
Insert batteries - note correct	Replace the cover.
polarity ( + and -).

Do not use rechargeable (Ni-Cad) batteries.

They are different in shape and performance and may fail to ensure correct operation.

Battery cautions

The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the batteries to burst.

Observe the following precaution:

1.Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2.Do not combine a used battery with a new one.

3.Do not mix battery types (example:“Zinc Carbon” with “Alkaline”).

4.Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

5.Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.

How to use the LCD stand

Adjust the LCD panel to your desired angle.
The LCD panel can be adjusted the following direction:
5 °	Forward	(View from the side)
10°	Backward
20°	Right	(View from the top)
20°	Left

How to hang the LCD TV on the wall

This LCD TV is for use only with the following optional accessory.

•Wall-hanging bracket ·························································· TY-WK22LR1W Always be sure to ask a qualified technician to carry out set-up.

WARNING

•DO NOT use other optional accessories.

Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

5