Panasonic TX-22LT2 Warnings and Precautions, Warning High Voltage, TV Games / Home Computers

Models: TX-22LT2

1 40
Download 40 pages 44.82 Kb
Page 3
Image 3
Warnings and Precautions
Example 2
Example 1

Warnings and Precautions

This TV set is designed to operate on DC 15V.

To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

WARNING : HIGH VOLTAGE!!!

Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.

TV Games / Home Computers

Extended use of TV games or home computers with any television set can cause a permanent ‘shadow’ on the screen. This type of irreversible LCD panel damage, can be limited by observing the following points:

Reduce the brightness and contrast levels to a minimum viewing level.

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the LCD TV screen.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

This type of LCD panel damage, is not an operating defect, and as such is not covered by the Panasonic warranty.

•The On/Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV set is not used for a prolonged period of time.

Note:

If the set is not switched off when the TV station stops transmitting, it will automatically go to stand-by mode after 30 minutes. This function will not operate when the TV is in AV mode.

Cabinet and LCD panel care

Remove the mains plug from the wall socket. The cabinet and LCD panel can be cleaned with a soft cloth moistened with mild detergent and water. Do not use solutions containing benzol or petroleum.

When ambient temperature is cool, the picture may take a short time to reach normal brightness, but this is not a malfunction. (After brief moment, the picture will have normal brightness.)

Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 10cm is left all around this television receiver even when it is placed inside a cabinet or between shelves.

Avoid exposing the TV set to direct sunlight and other sources of heat.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or BSI to BS1362.

Check for the ASTA mark •WARNING : HIGH VOLTAGE!!! or the BSI mark •TV Games / Home Computers on the body of the fuse.

If the fitted plug has a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. Replacement fuse covers can be purchased through your local Panasonic dealer.

If the fitted moulded plug is replaced, the fuse should be taken out and the cut-off plug disposed of safely. There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted please observe the wiring code as shown below.

If in any doubt please consult a qualified electrician.

How to replace the fuse (for plug type shown in example 1):

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely into the mains plug (see example 1).

How to replace the fuse (for plug type shown in example 2):

Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then press the fuse cover down securely (see example 2).

IMPORTANT: -The wires in the mains lead of this appliance are coloured in accordance with the following code :-

BLUE : NEUTRALBROWN : LIVE

As the colours of the wires in the mains lead of this appliance may not correspond to the markings identifying the terminals in your plug, proceed as follows :-

1.The BLUE wire must be connected to the terminal marked ‘N’ or coloured black.

2.The BROWN wire must be connected to the terminal marked ‘L’ or coloured red.

IMPORTANT NOTE: Under no circumstances should either of these wires be connected to the Earth terminal of the three pin plug, marked with the letter ‘E’ or the earth symbol. •Cabinet and LCD panel care

3

Page 3
Image 3
Panasonic TX-22LT2 Warnings and Precautions, Warning High Voltage, TV Games / Home Computers, Cabinet and LCD panel care