Panasonic TX-37LZD800A Displaying PC Screen on TV, Picture, Select the external input, Setup

AV3

AV4

PC HDMI1

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
•To connect PC		p. 39
	INPUT	1	Select the external input
ASPECT	EXIT
	OK	2
MENU	RETURN		Select “PC”
			Input Selection
	OPTION DIRECT TV REC		AV1
			AV2

1 2 3

access

select

4		5	6		HDMI2
					HDMI3	Corresponding signals (p. 42)
					TV
7		8	9			•If “H-freq.” or “V-freq.” is shown in red,
						•the signals may not be supported.
		0				PC Audio input is via AV2 Audio
		VCR				•connection. (p. 39)
	■To return to TV
	■PC menu setting (changed as desired)
	•To make settings “How to Use Menu Functions” to (p. 18)
	Menu		Item		Adjustments / Configurations (options)
	Picture			R-Gain	Adjusts the white balance for red areas
		Advanced		G-Gain	Adjusts the white balance for green areas
				B-Gain	Adjusts the white balance for blue areas
		PC
		Settings		Gamma	(2.0 / 2.2 / 2.5)
				Reset PC	Press the OK button to reset to the default Picture settings
				Settings
				Input	Switches to a wide view
					VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
				Resolution	•XGA (1,024 × 768 pixels), WXGA (1,366	× 768 pixels)
					•Options change depending on signals
				Clock	Set to the minimum level if noise occurs
				H-pos	Adjusts horizontal position
	Setup	PC
					Adjusts vertical position
		Setup		V-pos
					Eliminates flicker and distortion	•Set to the minimum level if noise occurs
				Clock Phase	•Adjust after Clock adjustment
				Sync	PC sync signal type (H & V / SOG)
					H & V : Horizontal and Vertical sync from your PC (Most common sync format)
					•SOG : Sync on Green sync from your PC
				Reset PC	Press the OK button to reset to the default Setup settings
				Settings
30	•Other	items	p. 20 and p. 21