Panasonic TX-47P600HZ Before Operating This Set, Safety Precaution Securing the casters

Before Operating This Set

Safety Precaution / Securing the casters

Please take safety precautions to prevent the unit form falling over.

The unit may fall over during earthquakes, or if someone stands on or shakes the TV.

Fixing to a wall

Use a strong rope or a chain to fasten the TV firmly to a strong support such as a wall or a pillar.

To prevent the set from tipping forward, turn the two casters on the front of the TV so they face forward, as shown in the picture.

Connecting the Plug to the Wall Outlet

Note:

The On/Off switch on this model does not full disconnect the TV from the mains supply.

How to Turn the Power On

Power Indicator

Power Switch

Power OFF	Power Indicator
	No light: Power OFF condition

Note: Even when the Power Switch is "OFF", the TV set

will still consume a small amount of power.

Power ON	Push the Power switch on Television to turn the set on.
		Power Indicator
		No light: Normal viewing condition
		Red : Stand by

Notes:

•When in the Stand-by condition (Refer to page 13), it is also possible to turn the TV set on by pressing any of the “Direct Programme Number Selection buttons” (0-9) or “Programme Number Up or Down buttons” on the TV set or on the Remote Control.

•If the Wall Outlet is switched OFF or the Main Plug is unplugged, when the TV set is again turned ON (by either connecting the Main Plug to the Wall Outlet or switching the Wall Outlet ON), it will have returned to the original state.

6