Preset Operation
GEOMAGNETIC
All televisions, particularly large screen televisions, are affected by the earth’s Magnetic Field. The symptom may show up as blurring of colours or strange discoloured patches. The location and direction of the television can add to the interference problem.
The Geomagnetic Correction option can be used to overcome some of these effects.
Geomagnetic Correction Using the Front Panel Controls
1.Open the front panel door.
2.Push the PRE. Button seven times.
3.Use the front panel Programme Number Up or Down Buttons to adjust the picture for best colour. Pay special attention to the four corners of the picture. The Geomagnetic Correction has a range of
4.When you are satisfied with your adjustment you can return the television to normal operation by pushing the PRE. Button once.
1 | PRESET |
|
AUTO TUNE |
| |
MANUAL TUNE |
| |
COLOUR SYS | AUTO | |
FINE TUNE |
| |
SKIP |
| OFF |
POS. CHANGE | 1 | |
GEOMAGNETIC | 0 | |
Geomagnetic Correction Using the Remote Control
MAIN MENU
PRESET
1.Push the MAIN MENU Button.
2.Select the PRESET Menu using the Left ( 
) or Right ( 
) Button. When the Preset symbol is highlighted, the Preset Menu has been selected.
3.Push the Down ( 
) Button to access the GEOMAGNETIC option.
4.Use the Remote Control Programme Left ( 
) or Right ( 
) Button to adjust the picture for best colour. Pay special attention to the four corners of the picture. The Geomagnetic Correction has a range of
5.When you are satisfied with your adjustment you can return the television to normal operation by pushing the MAIN MENU Button twice.
Special Note
1.If the adjustment still allows coloured patches on the screen, turn the mains power off for about 30 minutes.
2.In some cases the geomagnetic adjustment will not completely eliminate the interference. In this situation it will be necessary to relocate the television.
31
