Rear Panel Connections Common Interface Module (This feature is not currently in use in Australia).
42
TV
Insert flap
side to the
left.
Viewing card
Card
reader
The Common Interface Module menu provides access to software contained on Common Interface
Modules. These can be inserted in the "CI1" and "CI2" slots located at the rear of the TV.
IMPORTANT NOTES:
Switch off the TV using the front panel switch before Inserting or removing a module.
If you are Installing a TV software update, please follow the dedicated Instructions supplied with the
module.
Inserting a conventional Common Interface Module.
Some Common Interface Modules may be a
two piece design consisting of a card reader
together with the viewing card. When using this
design of card, first insert the card reader firmly
into a Cl slot on the TV (flap side to the left).
Secondly, insert the viewing card into the
reader.
Switch on the TV
Open the Setup menu
Move to DVB setup
Access DVB setup menu
Move to Common Interface Module
Access Common Interface Module
Select the Module name
Access the module
If no modules are inserted the message "No module inserted" will be
displayed. (If you have inserted a module, check that it is fully inserted.)
The features that now appear on screen are dependent on the contents of the selected Common
Interface Module. Refer to the instructions supplied with the card or contact the vendor.
In all cases, it is possible to navigate the pages using buttons on the remote control, but because the
commands available must apply to all manufacturers of DVB equipment, some on-screen commands may
not correspond exactly to the remote control buttons. For example:
For the on-screen command 'select' or 'go', use the OK button.
If you see the A " B Y symbols, use the cursor keys.
If you see a line of key words displayed in red, green, yellow and blue, use the coloured
multifunction buttons to operate the functions.
The EXIT button should always allow you to exit the Cl software.
Select
Access
Exit
Flicker reduction On
Geomagnetic
AV2 out Analogue
Tuning menu
Off timer Off
DVB timer lock Off
Teletext Top
Setup menu
DVB Timer programming
DVB setup Access
Display timeout 3 seconds
PC Connection
Modem
Preferred subtitle English
Favourites setup
System update
DVB - Setup
Signal quality
Common interface module
Access
DVB - Setup
Access
S
E
R
I
A
L
AV1
AV2
AV4
M
O
D
E
M
CI 1
TO ACCESS COMMON
INTERFACE SLOTS PLEASE
REMOVE COVER
CI 2