PC Connection and Modem (This feature is not currently in use in Australia).
The PC Connection and Modem menus allow you to make adjustments to the communication settings for the SERIAL and MODEM ports. You may wish to refer to the operating instruction books for any external equipment before changing these settings.
Open the Setup menu
Move to DVB setup
Access DVB setup menu
Move to PC Connection or Modem
Access the chosen menu
Make the required adjustments. ('OK' - Store will be flashing)
Press the OK button to store the settings
Select
Access
Exit
|
| Setup menu |
|
| DVB Timer programming | Access | |
| Off timer | Off | |
| DVB timer lock | Off | |
DVB setup |
| ||
Teletext | Top | ||
Flicker reduction | On | ||
| Geomagnetic |
| |
| AV2 out | Analogue | |
| Tuning menu |
| |
|
|
| Select |
|
|
| Access |
|
|
| Exit |
DVB - Setup |
| ||
Signal quality |
| ||
Common interface module |
| ||
Favourites setup |
| ||
Preferred subtitle | English | ||
System update |
| ||
Display timeout | 3 seconds | ||
PC Connection | Access | ||
Modem |
| ||
Press the EXIT button to exit | EXIT |
Baud Rate (bit/sec) Sets the speed of transmission. Use the highest speed allowed by the external equipment.
Number of Data Bits | Determines the number of consecutive |
| data bits to be sent. Select from either 7 |
| or 8. |
Stop Bits | Determines the number of stop bits to be |
| used. Select from 1 or 2. |
Protocol | Determines whether a protocol should |
| be used. Select from None, Hardware or |
| Software. |
Return
Select
Change
Store
Exit
PC Connection |
|
Baud rate (bit/sec) | 115200 |
Number of data bits | 8 |
Stop bits | 1 |
Protocol | None |
Parity | None |
Parity | Determines whether parity checking |
| should be used. Select from None, Odd |
| or Even. |
| Modem only: |
Dialling | Select either DTMF (Tone) dialing or |
| Pulse dialing. |
Return
Select
Change
Store
Exit
Prefix | Many internal telephone networks |
| require you to dial a single digit before |
| dialing an "outside line". If the Modem is |
| connected to such a system, use the |
| Prefix function to enter the initial dig it, |
| for example 0. |
Modem |
|
Baud rate (bit/sec) | 38400 |
Number of data bits | 8 |
Stop bits | 1 |
Protocol | None |
Parity | None |
Dialling | DTMF |
Prefix | None |
Redial attempts | None |
Redial attempts The Redial attempts function allows the TV to automatically redial a number if a connection cannot be made.
43
