13
Power ON/OFF
Installation
Push the POWER button on this unit to turn the set on
POWER-ON
Press POWER once more to turn off.
Power Indicator: Green
Power Indicator: Indicator not illuminated
( Please understand the Digital CATV Terminal is not updated
when you plug off from AC outlet.)
<When using the remote control>
1
Press the Remote Control CBL mode button
2
Press the POWER button.
Changing the TV input source (Panasonic TV models)
1
Press the TV mode button.
2
Press the POWER button to turn on the power for the TV.
3
Press the TV/VCR button to select the picture from the Digital
CATV Terminal. If the connection is via the CABLE OUT jack as
shown on page 11, use the CH UP/DOWN button on the TV to
set the channel to the VCR output channel (channel 3 or 4).
Note:
l If using a non-Panasonic brand TV, make the selection directly
at the TV itself, or use the TV’s remote control to make the
setting as described on page 17.
l Some Panasonic brand TVs may have different remote control
codes,so that these TVs cannot be operated as described
above even though they are Panasonic-brand TVs. In such
cases, make the selection directly at the TV itself, or use the
TV’s remote control to make the setting as described on page
17.
l The default remote control settings do not allow TV and VCR
CH UP/DOWN settings to be made.You first need to clear the
channel lock as described on page 20.
Procedure
Power Indicator
21
2
3
1