17
Programming the Remote Control
The Universal Remote Control can be programmed to operate many manufacturers’components using the
component function buttons for TV, VCR, or AUX. Follow the procedures for programming your Remote Control
with and without codes for the component. Determine the manufacturer of the component and look in the table for
the code.
Use the following procedure to program the TV remote control code. At the time of
shipment from the factory, this is set to Panasonic-brand TVs (code:0250).
Use the following procedure to program the TV remote control code.
1.Select the Setup Code for your TV by referring to the tables on pages 21 to 24. If you
cannot find the right Setup Code, refer to “Programming Without Code” on page 18.
2.Press the TV button, and then press the Setup button and hold for 3 seconds (until
the visible LED blinks twice).
3.Use the numeric buttons on the remote control to enter a 4-digit Setup Code. When
programming is complete, the LED on the remote control will flash twice.

n Programming for TV operation

n Programming for VCR operation

n Programming for AUX (other component) operation

You can use the remote control for the Digital CATV Terminal to operate your VCR,DVD
player. However, a VCR Commander Module (not included) is requred in order to
program your VCR for recording. If you are not using a VCR Commander Module, you
will need to make the programming operations directly at the VCR. For details, refer to
the User’s Guide which is supplied with the VCR Commander package. At the time of
shipment from the factory, the code is set to Panasonic-brand VCRs (code: 1062).
Use the following procedure to program the VCR or DVD player remote control code.
1.Select the Setup Code for your VCR by referring to the tables on pages 21 to 24. If you
cannot find the right Setup Code, refer to “Programming Without Code” on page 18.
2.Press the VCR button, and then press the Setup button and hold for 3 seconds (until
the visible LED blinks twice).
3.Use the numeric buttons on the remote control to enter a 4-digit Setup Code. When
programming is complete, the LED on the remote control will flash twice.
You can use the remote control for the Digital CATV Terminal to operate a CD player,
DVD player, Audio Amplifier, Miscellaneous Audio component, Audio Amplifiers and
Tuners, Home Automation equipment or Cable Converter. At the time of shipment from
the factory, the code is set to Panasonic-brand CD player (code: 0303).
Use the following procedure to program the desired component.
1.Select the Setup Code for the desired component by referring to the tables on pages
21 to 24. If you cannot find the right Setup Code, refer to “Programming Without
Code” on page 18.
2.Press the AUX button, and then press the Setup button and hold for 3 seconds (until
the visible LED blinks twice).
3.Use the numeric buttons on the remote control to enter a 4-digit Setup Code. When
programming is complete, the LED on the remote control will flash twice.
If the component does not operate with the remote control, repeat the procedure using
another code. (Some brands have multiple codes.)
If you enter an incorrect Code, or if no button is pressed for 10 seconds or
more, the program will be canceled.

Unsuccessful Code

AUX button
VCR button
LED
TV button
Setup button
Numeric buttons