Computer Interfacing
19
English
8Follow the on-screen instructions if the wizard
windows appear.
•If the wizard window is displayed to select
the file (##.inf) for the printer driver in
Windows XP, select “windows\inf\oem##.inf”.
•If the wizard window is displayed to connect
to the Windows Update in Windows XP SP2,
select [No].
•If the warning dialog is displayed in
Windows 2000 / Windows XP, select [Yes] or
[Continue Anyway] to continue the
installation. In Windows Vista, no warning
window is displayed and installation will
continue.
•The new hardware wizard w indows may be
displayed several times depending on the
operating system.
•For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required.
9When the installation is completed, click [OK].
Note
• If the Panaboard is powered on and connected
to the computer with a USB cable when [Exit] is
clicked after the installation is completed, the
Board Image Capture software will automatically
start in Windows 2000 / Windows XP / Windows
Vista. (For further details, refer to “Scanning
with the Board Image Capture” on page 20.)
■Installing Quick Image Navigator /
Panasonic-DMS
After confirming your operating system, install the
software.
For Windows 2000 / Windows XP / Windows Vista:
Quick Image Navigator
For Windows 98 / Windows Me: Panasonic-DMS
If Panasonic-DMS is already installed, you do not
need to uninstall it.
1Power on your computer and start Windows.
•Log on as an administrator for Windows
2000, Windows XP or Windows Vista.
2Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
•Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, double-click “Menu.exe” in
the CD-ROM from the Explorer.
•If the Autoplay dialog box appears in
Windows Vista, click “Run Menu.exe”.
3When “Welcome” window appears, click
[Next].
4Click [Download Quick Image Navigator].
•To download Quick Image Navigator and
Panasonic-DMS, your computer must be
able to access the Internet.
5Download the desired software from the
appropriate download web site, then double-
click the downloaded installer.
6Follow the on-screen instructions when
messages appear.
7When the setup process is completed, restart
Windows.
•For information about Quick Image Navigator
or Panasonic-DMS, refer to the
corresponding operating instructions, which
can be downloaded from the web site.
•To read the Quick Image Navigator operating
instructions or the Panasonic-DMS operating
instructions, Adobe Reader or Acrobat
Reader must be installed on your computer.
■Removing Drivers / Board Image
Capture / Quick Image Navigator
If you need to remove the USB driver, printer driver,
TWAIN driver, Board Image Capture and Quick Image
Navigator, perform the following steps.