Computer Interfacing
18
■Installing Drivers / Board Image
Capture
The USB, printer, TWAIN driver and Board Image
Capture are installed in your computer by following
procedures.
Note
•Do not yet connect a USB cable to the
electronic board.
1Power on your computer and start Windows*1.
•Log on as an administrator for Windows
2000, Windows XP or Windows Vista.
*1Microsoft® Windows® operating system
(hereafter Windows)
2Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
•Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, execute “Menu.exe” in the
CD-ROM from the Explorer.
•If the Autoplay dialog box appears in
Windows Vista, click “Run Menu.exe”.
3When “Welcome” window appears, click
[Next].
4Click [Install Panaboard Software].
•If “User Account Control” window is
displayed in Windows Vista, select
[Continue] to continue the installation.
•To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat® Reader must be installed in your
computer. It can be downloaded from the
Adobe's Web site if Internet is available.
5Read “End-User License Agreement” carefully
and click [Yes].
6When the following window appears, check
that the electronic board is not connected to
your computer and click [OK].
•If “Windows can't verify the publisher of this
driver software” is displayed in Windows
Vista, select “Install this driver software
anyway” to continue the installation.
•For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required.
•If the screen prompts to restart Windows,
restart Windows.
7When the following window appears after files
are copied, power the electronic board on, and
connect a USB cable from the electronic
board to your computer.