Sending Documents 
Redialling
Automatic Redialling
If the line is busy or there is no answer, your machine will redial the number up to 3 times at 3 minutes interval. During that time, a message will appear as shown to the right.
A file number is shown at the upper right corner of the display if it is a memory transmission file.
Manual Redialling
You can also redial the last dialed number manually by pressing the
To redial the last dialed number through memory
WAIT TO DIAL NO.001 (Telephone number)
4
REDIAL key.
1 | ENTER STATION(S) |
THEN PRESS START 00% |
Set document(s) face down.
Make sure that the MEMORY lamp is on.
2 PAUSE/ REDIAL
3
START
The document is stored into memory with a file number. Then dials the last dialed number.
To redial the last dialed number through ADF
TEL. NO. 5551234
* STORE * | NO.002 |
PAGES=01 01%
*DIALLING * NO.002 5551234
1
2
3
Note:
| ENTER STATION(S) |
| THEN PRESS START 00% |
Set document(s) face down. |
|
MEMORY | ENTER STATION |
Make sure that the lamp goes off. | 00% |
PAUSE/ |
|
REDIAL | TEL. NO. |
| 5551234 |
Your machine starts to dial the last dialed number. | * DIALLING * |
| |
| 5551234 |
1. While the unit is displaying ºWAIT TO DIALº, you can press REDIAL to start redialling immediately.
2. While the unit is displaying ºDIALLINGº and a message is heard through the monitor that the circuits are busy....., you can press REDIAL to start redialling immediately.
59