160
When the DVD Video Camera is connected to PC:
Symptom Cause and Correction Reference
page
No drive icon appears on
PC.
The DVD Video Camera is not turned on.
Check the power supply. 50
Turn PC off and then disconnect the USB cable. Turn PC on again,
and then use the USB cable to connect the DVD Video Camera to
PC.
⎯
Make sure the USB cable is completely plugged into this DVD Video
Camera. ⎯
Error occurs in playback
of DVD Video Camera on
PC.
If error occurs with USB connection, the transfer rate is not sufficient.
It is recommended that you use a USB terminal conforming to
USB2.0 when connecting the DVD Video Camera.
147
Application is
abnormally run on PC.
Turn the PC and DVD Video Camera off, and try again. ⎯
Error occurs during
writing to disc.
The temperature of DVD Video Camera is too high due to continuous
operation.
Disconnect the DVD Video Camera from PC once, remove the disc
from the DVD Video Camera, and then turn it off. After a few
moments, connect them again and write to a brand-new disc.
⎯
Transfer of images stops.Connect the DVD Video Camera to another USB te rminal of PC. If
your PC is a desktop type, it is recommended that you use USB
terminal on the back of PC.
⎯
DVD-RAM/R drive built
into PC cannot be used
after the provided
software has been
installed.
This problem may be solved if the software related to DVD-RAM/R
of your PC is upgraded, or if the DVD-RAM Driver is uninstalled.
However, with Windows® Me / 2000 Professional, uninstalling the
DVD-RAM Driver will make it impossible for the JPEG stills recorded
on DVD-RAM on this DVD Video Camera to be read by the PC.
⎯
DVD-R disc cannot be
played back on DVD-
MovieAlbumSE.
DVD-MovieAlbumSE does not support playback or data read of
DVD-R disc. Use optional-user provided DVD video playback
software to play back DVD-R disc on PC.
139
Error appears when
starting DVD-
MovieAlbumSE.
Make sure that your PC display adapter (video card) conforms to
DirectX 8.1. ⎯
Movies are not
recognized by
application in PC.
Make sure the power switch of this DVD Video Camera is set to
“ ”, “ ” or “ ”. ⎯
The DISC EJECT lever
does not work when the
DVD Video Camera is
connected to PC.
While the DVD Video Camera is connected to PC, use Explorer to
right-click the DVD Video Camera drive icon and execute “Eject”. ⎯
The DVD-RAM drive of
DVD Video Camera
cannot be opened by PC
Explorer or application.
Error appears. Disc
cannot be ejected.
If DVD-MovieAlbumSE is running, terminate it.
⎯
When the time stamp of
file in DVD-RAM is
viewed on PC, it is
different from the actual
recording time.
The file system of this DVD Video Camera is operated on Greenwich
Mean Time (GMT), and time lag information has not been set. With
Windows®, the time stamp of file viewed on Explorer looks different
from the actual recording time. The actual recording time will appear
as date/time indication on playback screen.
⎯
When DVD-
MovieAlbumSE is
started, “Disc in Drive X:
cannot be used”
appears.
A disc other than DVD-RAM is loaded in drive: DVD-MovieAlbumSE
cannot be used for media other than DVD-RAM. ⎯
Click the “Preference” button in the dialog box, click the “Device
setting” tab to choose the drive where DVD-RAM disc is loaded in the
“Drive Select” column, and then click “OK”.
143
VDR-M95M75M55M53PP.book Page 160 Tuesday, March 29, 2005 2:19 PM