135
lOperation with DVD Video Camera connected
The following operations are not possible when
connected to PC:
-Camera recording and playback using
operation buttons on DVD Video Camera
-Power off using the power switch on DVD Video
Camera
No image will appear on the LCD screen or
viewfinder of DVD Video Camera when it is
connected to PC:
Make sure that the DVD Video Camera is properly
connected to PC: the ACCESS/PC indicator
should show access to DVD-RAM or DVD-R disc,
the beep sound indicates start/end of PC
connection. (When disc is not accessed, the
ACCESS/PC indicator will not blink or light.).
If still images are recorded on disc, use Windows
Explorer to double-click the drive icon of DVD
Video Camera (DVD_CAMERA), and then click
the “\DCIM\100CDPFP” folder: The still JPEG
files will appear.
Use the DVD Video Camera with a computer that
supports USB2.0. If you connect it to a computer
that does not support USB2.0, a message
advising you to connect it to a computer that
supports USB2.0 will appear.
Note:
You can check whether or not the DVD Video Camera has
been correctly recognized by the computer. (See page
138)
If the DVD Video Camera is not automatically recognized
by your computer, you can use the following method to
enable it to be recognized.
Method 1: Turn off the DVD Video Camera and your
computer once and try again.
Method 2: Eject the DVD-RAM disc, DVD-R disc, or SD
Memory Card from the DVD Video Camera and try again.
Method 3: Try connecting the DVD Video Camera to
another USB port on your computer.
VDR-M95M75M55M53PP.book Page 135 Tuesday, March 29, 2005 2:19 PM