136

Installing DVD-RAM Driver

lBefore Installing DVD-RAM Driver

If another DVD-RAM Driver is already installed in your PC, confirm the original DVD-RAM Driver.
If the packet writing software which supports the DVD-RAM disc is installed, it is necessary to uninstall it,
and then install the provided DVD-RAM Driver.
1Insert the provided CD-ROM into the PC, and
click “DVD-RAM Driver” on the “Setup Menu”
screen.
If the “Setup Menu” screen does not appear,
double-click the CD-ROM drive icon.
2The driver setup screen will appear: Click the
“Driver and Formatter Setup” button.
One of the messages below may appear.
In this case, follow the message and continue the
installation procedure.
3Click “Next”.
4Check the contents of License Agreement. If you
accept it, click “Yes” (The contents displayed on
actual screen may differ from those in the
figure.).
This software is compatible only with Windows Me/2000/XP. It will not run in other versions of
Windows, such as Windows 98SE.
Click
Click
Click
VDR-M95M75M55M53PP.book Page 136 Tuesday, March 29, 2005 2:19 PM