35

To use as a Grip Belt again (Only for VDR-M95PP)

1Attach the tip of the grip belt to the DVD Video
Camera (1).
Press down the lock cover in the direction of the
arrow so that the belt will not fall out (2).

Attaching Shoulder Belt

Attaching Lens Cap

Pass the provided string through the hole in the Grip Belt Attachment part and pass it through the hole in
the lens cap.
1Attach the lens cap string to lens cap.
Shorter side is for the lens cap.
2Attach the string to the attachment hole of DVD
Video Camera.
Detaching the grip belt makes things easier.
3Push both sides of cap inward and attach it over
the lens.
Note:
Always keep the lens cap on when not using the DVD
Video Camera, to protect the lens.
When recording, attach the lens cap to the grip belt by
hooking the tab inside the cap onto strap for comfortable
shooting.
When using as a hand strap, you cannot attach the lens
cap to it.
Lock cover
Lock cover
Pass the Shoulder belt through
the Shoulder belt attachments.
Be sure to pass through the 2 slots.
Push and fit
VDR-M95M75M55M53PP.book Page 35 Tuesday, March 29, 2005 2:19 PM