12
5Attach the wires that connect to the monitor station and sub monitor station to
the terminal. See page 16 for details on how to attach the wires.
•See page 9 for the wire type and distance.
•See the wiring schematic diagram on page 9.
4Attach the power cable to the terminal. See page 16 for details on how to attach
the power cable.
•If you want to use your own power cable, see page 9 for the type and distance.
<Inside of main unit (bottom case)>
Button
Power switch
•When the front case is
attached, the power
switch will be pressed and
power will be supplied.
Terminal
(Non polar)
Wire
(Not included)
Introduction and Installation