Panasonic VL-GM001 installation and operation guide 8, 9, 7

14
Introduction and Installation
Arrow mark
DC terminal AC adaptor
8Connect the power cable to the DC terminal, the power cord to the AC adaptor,
then connect the power cord to the AC outlet (100 V – 240 V, 50 Hz / 60 Hz).
•Be sure to connect the power cable to the 2 holes on the left side of the DC
terminal.
•For details on how to attach the power cable, see page 16.
DC terminal AC adaptor Power cord
To AC outlet
Power cable
9Attach the DC cord to the clamp on the rear of the DC terminal.
• This will help to avoid the DC cord to disconnect from the DC terminal.
DC terminal
DC cord
Clamp
7Take out the AC adaptor and the DC terminal from the case.
•Push the arrow mark on the front case, then release from the rear case.
•Take out the cardboard and wood screws. The wood screws are necessary
when attaching the AC adaptor and the DC terminal to a wall (page 15).