How to use
Monitoring the outside
You can monitor the outside sounds and images taken by the Wireless Camera. R The sound from your end will not be heard at the Wireless Camera.
You can perform the following operations during monitoring: R Switching between Wide/Zoom (page 16)
R Recording images (page 17)
R Adjusting brightness (display)/owner’s volume (output volume)/visitor’s volume (input volume) (page 16)
MENU
PRESS TALK
1Press M
N (Monitor button).
R The outside image will be shown on the display, and you will hear the sound from outside. R To speak to the other party at the Wireless Camera, press MPRESS TALKN.
You can speak to the other party by pressing and holding MPRESS TALKN.
R 
appears on the display.
R You cannot hear the sound from the other party when MPRESS TALKN is pressed. You can hear the sound from other party by releasing MPRESS TALKN.
R 
disappears from the display.
R The sound from your end will not be heard at the Wireless Camera.
2To end operations, press M
N (Monitor button).
Note:
R Monitoring lasts for about 20 seconds after M
N (Monitor button) is pressed.
However, if operations are performed during monitoring, monitoring can be extended to a maximum of 3 minutes.
R At night or at other times when the area around the Wireless Camera becomes dark, the following occur:
–The image quality is reduced.
–Images are automatically brightened to make it easier to see the face of the other party. Although images may appear to be washed out, this is not a malfunction.
Adjusting brightness (display)/owner’s volume (output volume)/visitor’s volume (input volume)
1Press MMENUN while monitoring.
2Press MDN or MCN to select the desired item (such as brightness).
3 Press MFN or MEN to adjust it.
Manipulating displayed images with Wide/Zoom and Pan/Tilt
During monitoring, the display can be temporarily switched between Wide/Zoom, and the Zoom position can be changed with Pan/Tilt operations.
16
