Others

TV, PC and printer

1:The picture does not appear on the television.

Is the camera connected to the TV correctly?

Set the TV input to external input mode.

2:The display areas on the TV screen and the camera’s LCD monitor are different.

Depending on the TV model, the area display may be smaller so the picture may be stretched horizontally or vertically and the top and bottom or left and right of the picture may be cut off when it is displayed. This is due to the TV specifications and is not a malfunction.

3:The motion pictures cannot be played back on a TV.

Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?

Connect the camera to the TV with the AV cable (supplied) and then play back the pictures on the camera. (P98)

4:The picture cannot be transferred when the camera is connected to a PC.

Is the camera connected to the PC correctly?

Is the camera recognized by the PC correctly?

Set [USB MODE] to [PC]. (P22, 91)

5:The card is not recognized by the PC. [The built-in memory is recognize (DMC-FX3)]

Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

6:The picture cannot be printed when the camera is connected to a printer.

Does the printer support PictBridge?

You cannot print pictures with printers which do not support PictBridge. (P94)

Set [USB MODE] to [PictBridge (PTP)]. (P22, 94)

7:The ends of the pictures are cut at printing.

When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

8:The picture is not displayed fully on the TV.

Set the aspect of the TV on the camera. (P23)

109

VQT0Y69

Page 109
Image 109
Panasonic VQT0Y69 109, Motion pictures cannot be played back on a TV, Ends of the pictures are cut at printing