Panasonic VQT0Y69 operating instructions Inserting/Removing the Battery

Preparation

Inserting/Removing the Battery

•Check that the camera is turned off and that the lens is retracted.

1 Slide the release lever in the direction of the arrow and open the card/battery door.

OPEN LOCK

•Always use genuine Panasonic batteries (CGA-S005A).

2Insert:

Insert the charged battery fully being careful about the direction you insert it.

Remove:

Slide the lock A to remove the battery.

14

3 1 Close the card/battery door.

2Slide the release lever in the direction of the arrow.

OPEN LOCK

•Remove the battery after use. Store the removed battery in the battery carrying case (supplied).

•When a fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for at least 3 months even if the battery is removed. (If you insert a battery that is not sufficiently charged, the length of time that the clock setting is stored may become less.) However, the clock setting is canceled after this length of time. In this case, set the clock again. (P18)

•Do not remove the card or the battery while the card is being accessed. The data may be damaged. (P16)

•Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the settings on the camera may not be stored properly.

•The supplied battery is designed only for the camera. Do not use it with any other equipment.

VQT0Y69